Controlling the R&S
FPS Remotely
R&S
®
FPS
73
Getting Started 1319.3362.02 ─ 07
The settings on this tab are used to select and optimize the connection speed.
4. In the list, select the appropriate connection (for example: LAN (10 Mbps or
higher)).
Depending on your selection (and how powerful the connection is), the
options are activated or deactivated.
5. To improve the performance, you can deactivate the "Desktop background",
"Show window contents while dragging" and "Menu and window animation"
options.
6. Open the "Local Resources" tab to enable printers, local drives and serial
interfaces.
7. If you will need to access drives of the controller from the R&S
FPS (e.g. in
order to store settings or to copy files from the controller to the R&S
FPS),
activate the "Disk drives" option.
Windows will then map drives of the controller to the corresponding network
drives.
8. To use printers connected to the controller while accessing them from the
R&S
FPS, activate the "Printers" options. Do not change the remaining set-
tings.
9. Open the "Display" tab.
The options to configure the R&S
FPS screen display are displayed.
10. Under "Remote desktop size", you can set the size of the R&S
FPS window
on the desktop of the controller.
11. Under "Colors", do not change the settings.
12. Set the "Display the connection bar when I use the full screen" option:
If activated, a bar showing the network address of the R&S
FPS will appear at
the top edge of the screen. You can use this bar to reduce, minimize or close
the window.
If deactivated, the only way you can return to the controller desktop from the
R&S
FPS screen in full screen mode is to select "Disconnect" from the "Start"
menu.
How to Set Up Remote Desktop
Summary of Contents for R&S FPS
Page 25: ......
