Controlling the R&S
FPS Remotely
R&S
®
FPS
74
Getting Started 1319.3362.02 ─ 07
5.6.3
How to Start and Close the Remote Desktop
To set up a connection from the controller to the R&S
FPS
1. On the controller, in the "Remote Desktop Connection" dialog box (see
ter 5.6.2, "How to Configure the Controller"
on page 72), open the "General"
tab.
2. In the "Computer" field, enter the IP address of the R&S
ter 5.2.2, "How to Assign the IP Address"
on page 59 to determine the IP
address).
In the "User name" field, enter
instrument
to log in as an administrator, or
Nor-
mal User
to log in as a standard user.
In the "Password" field, enter
894129
.
3. To save the connection configuration for later use:
a) Select the "Save As" button.
The "Save As" dialog box is displayed.
b) Enter the name for the connection information (
*.RDP
).
4. To load an existing connection configuration:
a) Select the "Open" button.
The "Open" dialog box is displayed.
b) Select the
*.RDP
file.
5. Select the "Connect" button.
The connection is set up.
6. If the "Disk drives" option is activated on the "Local Resources" tab, a warning
is displayed indicating that the drives are enabled for access from the
R&S
FPS.
Select "OK" to confirm the warning.
7. After a few moments, the R&S
FPS screen is displayed and manual operation
is possible.
For details on manual operation see
Chapter 6, "Operating the Instrument in
8. If a dark screen appears or a dark square appears in the upper left-hand cor-
ner of the screen, you must restart the R&S
FPS in order to see the modified
screen resolution.
How to Set Up Remote Desktop
Summary of Contents for R&S FPS
Page 25: ......
