Rohde & Schwarz R&S FPS Getting Started Download Page 67

Page: 67 / 148

Miniature Display

R&S

FPS

Getting Started 1319.3362.02 ─ 07

Backlight saving ← Display

If enabled, the backlight of the display is turned off to save energy.

Normal/inverse color ← Display

Switches between a display with light characters on a dark background (normal)
or dark characters on a light background (inverted).

Info

Provides information on the R&S

FPS installation.

This information can be useful when problems occur with the instrument and you
require support from Rohde & Schwarz.

Serial ← Info

Serial number of the R&S

FPS

FW version ← Info

Currently installed firmware version

Model ← Info

Instrument model

uC version ← Info

Microcontroller version

4.2

Working with the Miniature Instrument Display

Using the miniature display on the front panel of the R&S

FPS you can change

basic instrument settings and perform hardware functions directly on the instru-
ment, without additional devices such as a controller PC or external monitor.

To display a particular setting in the menu

The information and configuration settings are displayed in a hierarchical menu
structure.

► To navigate within the menu structure, do one of the following:

● Press the <Up Arrow> and <Down Arrow> keys to scroll through the

menus.

Working with the Miniature Instrument Display

Summary of Contents for R&S FPS





















































































































































Search results

Summary of Contents for R&S FPS

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S FPS, Getting Started

Search results

Summary of Contents for R&S FPS

Reviews:

Brands by name

Popular brands