Preparing for Use
R&S
®
FPS
20
Getting Started 1319.3362.02 ─ 07
4. Press the ENTER key to confirm.
The automatic login function is deactivated. The next time you switch on the
instrument, you are prompted to enter your user name and password before
the firmware is started. (You must use an external monitor and keyboard or
Remote Desktop from a controller PC, not the R&S
FPS miniature display!)
Adapting the automatic login function to a new password
If you change the "Instrument" user's (administrator's) password, which is used
during automatic login, this function no longer works. You must adapt the settings
for the command that activates the auto login function first.
If the SecureUser or the NormalUser are enabled, those passwords are used for
autologin. In that case, if you change any of the passwords, the autologin function
must be adapted each time you change the user account.
1. Open the
C:\R_S\INSTR\USER\NO_AUTOLOGIN.REG
file in any text editor
(e.g. Notepad).
2. In the line
"DefaultPassword"="894129"
, replace the default password
(
894129
) by the new password which is to be used for automatic login.
3. Save the changes to the file.
Re-activating the automatic login function
1.
Select the "Windows" icon in the toolbar to access the operating system of the
R&S
FPS.
2. In the "Start" menu, select "Run".
The "Run" dialog box is displayed.
3. Enter the command
C:\R_S\INSTR\USER\AUTOLOGIN.REG
.
4. Press the ENTER key to confirm.
The automatic login function is re-activated. It will be applied the next time the
instrument is rebooted.
Windows Operating System
Summary of Contents for R&S FPS
Page 25: ......
