manualshive.com logo in svg

Rohde & Schwarz R&S FPS, Getting Started

Share
Download
Rohde & Schwarz R&S FPS Getting Started Download Page 52

Instrument Tour

R&S

®

FPS

29

Getting Started 1319.3362.02 ─ 07

3

Instrument Tour

3.1

Front Panel View

This chapter describes the front panel, including all function keys and connectors.

2

3

4

5

7

1

6

Figure 3-1: Front panel view

1 = On/Off button
2 = USB connectors
3 = Mini display
4 = Navigation and data input controls
5 = Status LEDs
6 = Solid State Disk (SSD) containing instrument firmware
7 = RF Input 50 

Ω

 connector (optionally front or rear panel)

Instrument damage caused by cleaning agents

Cleaning agents contain substances that may damage the instrument. For
example, cleaning agents that contain a solvent may damage the front
panel labeling, plastic parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc), acids,
bases, or other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lint-
free dust cloth.

On / off button

The POWER key is located on the lower left corner of the front panel. It starts up
and shuts down the instrument.

 

 

Front Panel View

Summary of Contents for R&S FPS





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands