Miniature Display
R&S
®
FPS
39
Getting Started 1319.3362.02 ─ 07
NOTICE!
Risk of network problems. All network parameters can be edited by the
administrator ("Instrument" user) only. Beware that changing the computer name
has major effects in a network.
For details, see
Chapter 5, "Controlling the R&S
Computer Name ← Network
Each instrument is delivered with an assigned computer name, but this name can
be changed. The naming conventions of Windows apply. If too many characters
and/or numbers are entered, an error message is displayed in the status line.
The default instrument name is a non-case-sensitive string with the following syn-
tax:
<Type><variant>-<serial_number>
For example
FPS13-123456
The serial number can be found on the rear panel of the instrument. It is the third
part of the device ID printed on the bar code sticker:
DHCP ← Network
Switches between DHCP server available (On) or not available (Off). If a DHCP
server is available in the network, the IP address and subnet mask of the instru-
ment are obtained automatically from the DHCP server.
IP Address ← Network
Defines the IP address. The TCP/IP protocol is preinstalled with the IP address
10.0.0.10. If the DHCP server is available ("DHCP On"), the setting is read-only.
The IP address consists of four number blocks separated by dots. Each block
contains 3 numbers in maximum (e.g. 100.100.100.100), but also one or two
numbers are allowed in a block (as an example see the preinstalled address).
Subnet Mask ← Network
Defines the subnet mask. The TCP/IP protocol is preinstalled with the subnet
mask 255.255.255.0. If the DHCP server is available ("DHCP On"), this setting is
read-only.
Functions and Settings in the Mini Display Menu
Summary of Contents for R&S FPS
Page 25: ......
