Instrument Tour
R&S
®
FPS
31
Getting Started 1319.3362.02 ─ 07
Status LEDs
Indicate the instrument's operating status:
Table 3-1: Status LEDs
Label
Description
EXT REF
External reference connected and active
WAIT FOR TRIGGER
Measurement waiting for trigger
WARNING
Warning or system error
Removable Solid State Disk (SSD)
The removable solid state disk contains the instrument firmware and all measure-
ment data from the R&S
FPS, allowing you to store the data securely in an exter-
nal location.
RF INPUT 50
Ω
A device under test (DUT) can be connected to the R&S
FPS to provide RF input
which is then analyzed. The DUT is connected to the instrument's RF INPUT via
a cable equipped with an appropriate connector.
The RF Input connector may be provided on the front or rear panel, as requested
by the customer.
Risk of instrument damage
Do not overload the input. For maximum allowed values, see the data
sheet. For AC-coupling, a DC input voltage of 50 V must never be excee-
ded. For DC-coupling, DC voltage must not be applied at the input. In both
cases, noncompliance will destroy the input mixers.
3.2
Rear Panel View
This figure shows the rear panel view of the R&S
FPS. The individual elements
are described in more detail in the subsequent sections.
Rear Panel View
Summary of Contents for R&S FPS
Page 25: ......
