Miniature Display
R&S
®
FPS
37
Getting Started 1319.3362.02 ─ 07
4
Miniature Display
The R&S
FPS is equipped with a miniature display on the front panel (see also
The display provides the following information:
●
The serial number, firmware version and model of the instrument
●
The IP address of the instrument
●
The GPIB address of the instrument
●
System messages, for example when errors occur
Furthermore, it provides the following functions directly on the instrument:
●
Configuring network settings, including LXI and GPIB parameters
●
Performing selftests, self alignment
●
Resetting the instrument to a predefined state
●
Changing display settings
The miniature front panel display is meant as a service interface, not for
measurement display. If the display fails for any reason, switch the instru-
ment off and back on again to restore the display.
Note that any error messages
caused by the Windows
7 operating system
are not displayed on the miniature front panel display. They are only visible
on an external monitor or via RemoteDesktop from a controller PC. Thus, if
operation of the R&S
FPS seems to fail for no obvious reason, try connect-
ing a monitor or a controller PC to check for any messages awaiting confir-
mation or action.
(See
Chapter 2.3, "Connecting USB Devices"
"How to Set Up Remote Desktop"
4.1
Functions and Settings in the Mini Display
Menu
The following functions and settings are available via the menu in the R&S
FPS's
mini display.
Functions and Settings in the Mini Display Menu
Summary of Contents for R&S FPS
Page 25: ......
