Rohde & Schwarz EVSF1000 User Manual Download Page 15

Page: 15 / 295

Getting Started

R&S

EVSF1000

User Manual 1178.6410.02 ─ 05

3.3.1.2

USB Connectors (2x)

The front panel provides two female USB connectors (USB-A, 2.0 standard) to connect
devices like a memory stick or a USB keyboard.

The memory stick is used to store and reload instrument settings, to perform software
updates and to export measurement data.

A standard USB keyboard is used to configure the basic TCP/IP parameters.

For details, see

Chapter 3.4.1, "Basic Configuration and Status Display"

on page 22.

3.3.1.3

AF Out

Connection of a headset with a 3.5 mm jack plug into the AF OUT plug.

3.3.1.4

Carry Handle

The carry handle is used to remove the R&S

EVSF1000 from the flight inspection rack

in which the R&S

EVSF1000 is mounted.

Instrument Tour

Summary of Contents for EVSF1000








































































































































































































































































































Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSF1000, User Manual

Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands