manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 262

Remote Commands

R&S

®

EVSF1000

262

User Manual 1178.6410.02 ─ 05

5_MS

Sets the value to 5 ms.

2_MS

Sets the value to 2 ms.

1_MS

Sets the value to 1 ms.

500_US

Sets the value to 0,5 ms.

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"Time/Div"

 

on page 110

SCOPE_TRIGLEVEL_RFPCT?
SCOPE_TRIGLEVEL_RFPCT 

<Trig level>

This command gets or sets the trigger level for RF Input of the "AF Time Domain"
mode.

Parameters:

<Trig level>

Set trigger level.
Range: 

-100 to 100

Default unit: <%>

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"Trigger Level"

 

on page 111

SCOPE_TRIGSLOPE?
SCOPE_TRIGSLOPE 

<Trigger edge>

This command gets or selects the trigger edge for RF Input of the "AF Time Domain"
mode.

Parameters:

<Trigger edge>

POSITIVE

Sets positive SCOPE trigger slope.

NEGATIVE

Sets negative SCOPE trigger slope.

BOTH

Sets positive and negative SCOPE trigger slope.

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"Trigger Edge"

 

on page 111

AF Time Domain Mode

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands