Rohde & Schwarz EVSF1000 User Manual Download Page 13

Page: 13 / 295

Getting Started

R&S

EVSF1000

User Manual 1178.6410.02 ─ 05

7. Fasten the knobs on the tray manually by twisting them clock-wise.

The instrument is ready for operation.

Service adapter

If you need to operate a R&S

EVSF1000 with the slide-in hardware outside an aircraft,

you can use the optional service adapter (R&S

EVSF1-Z2) to connect a power supply

and any other signal input and output devices. The service adapter combines an
ARINC connector as described in

Figure 3-4

with the common connectors provided on

the rear panel of a conventional R&S

EVSF1000.

3.2.3

Starting the R&S

EVSF1000

After connecting the power supply, or the ARINC connector with an active power sup-
ply, R&S

EVSF1000 starts immediately.

Preparing for Use

Summary of Contents for EVSF1000








































































































































































































































































































Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSF1000, User Manual

Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands