manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 187

Remote Commands

R&S

®

EVSF1000

187

User Manual 1178.6410.02 ─ 05

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"ILS Phase"

 

on page 55

SETUP:UNIT:LEVEL?
SETUP:UNIT:LEVEL 

<unit>

This command sets the level unit.

Parameters:

<unit>

dBm | dBuV

dBm

Sets the level unit as dBm.

dBuV

Sets the level unit as dBuV.

Return values: 

<State>

READY.

The command was executed successfully.

SETUP:UNIT:POLARITYDDM?
SETUP:UNIT:POLARITYDDM 

<Value>

This command gets or sets the DDM polarity.

The phase is represented as unipolar, if between 0...+120.

Parameters:

<Value>

90-150

Sets DDM polarity as 90-150.

150-90

Sets DDM polarity as 150-90.

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"DDM Polarity"

 

on page 56

SETUP:UNIT:SDM?
SETUP:UNIT:SDM 

<Unit>

This command sets the SDM unit.

Parameters:

<Unit>

1

Sets SDM unit as dimensionless.

uA

Sets SDM unit as 

μ

A.

Common Instrument and Measurement Setup

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands