manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 224

Remote Commands

R&S

®

EVSF1000

224

User Manual 1178.6410.02 ─ 05

Parameters:

<State>

READY.

The command was executed successfully.

GS

This command switches the mode to the "ILS GP" mode. The 

GS

 command is identical

to the 

MODE_GP

 command.

Parameters:

<State>

READY.

The command was executed successfully.

FA0

This command stops the continuous output that was started with FA1, FA2, FA4, FA5,
STREAM.

Return values: 

<State>

READY.

The command was executed successfully.

FA1

This command activates the continuous output of DDM /level measurement results.
The output rate is defined by the current measurement time. Values are separated by a
TAB (ASC 09) DDM [1] RF level [dBm].

The command FA0 stops the output.

Return values: 

<State>

READY.

The command was executed successfully.

FA2

This command activates the continuous repetition of a set of values. The output rate is
defined by the current measurement time.

All values are transmitted as integer values, multiplied with a constant factor:

●

DDM [1], Multiplier: 10000

●

RF level [dBm], Multiplier: 10

●

AM-Mod90 [%], Multiplier: 100

●

AM-Mod150 [%], Multiplier: 100

The command FA0 stops the output.

Return values: 

<State>

READY.

The command was executed successfully.

ILS Localizer (LOC) and Glidepath (GP) Modes

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands