Rohde & Schwarz EVSF1000 User Manual Download Page 265

Page: 265 / 295

Remote Commands

R&S

EVSF1000

265

User Manual 1178.6410.02 ─ 05

Manual operation:

See

"List"

on page 161

GETDATA_FROM_ACTIVELIST

Exports the active data logger list data lines by remote.

Parameters:

Specifies the start data line of the data logger list.

Specifies the stop. data line of the data logger list. A stop param-
eter of -1 will export the data logger list to the end.

GETDLTIME?

Gets the data logger time for the current mode: "ILS LOC", "ILS GP", "ILS MB", "VOR",
or "COM".

Parameters:

<Time>

Data logger time
Default unit: ms

Usage:

Query only

GETFREEMEMORY

This command queries the amount of free storage space on the internal flash memory.

Return values:

Default unit: MByte

GETLISTDATA

This command queries the contents of the selected list.

Setting parameters:

list number
Range:

1 to 9999

Return values:

Contents of the list.

READY.

The command was executed successfully.

ERROR

An error occurred; command was not successful.

GETLISTSIZE

This command queries the size of the active list.

Data Management

Summary of Contents for EVSF1000








































































































































































































































































































Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSF1000, User Manual

Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands