manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 175

Common Instrument Settings

R&S

®

EVSF1000

175

User Manual 1178.6410.02 ─ 05

The test voltages are measured continuously, internally, and checked against defined
limit values. If one of the test voltages exceeds the tolerance for more than 10

 

s, the

following measures are taken by the R&S

 

EVSF1000:

●

An error message is created in the error log (see 

"Error Log"

 

on page 173).

●

The measured test voltage is indicated in red.

●

"UNCAL" is displayed in the measurement window to indicate the measured values
may be invalid.

Remote command: 

BI?

 

on page 192

GETTEMP

 

on page 193

Installed Options
Access VNC

: [n] > [F8] > [F4]

Displays a table with the currently installed option keys.

For all purchased R&S

 

EVSF1000 options, a license key is provided by

Rohde

 

&

 

Schwarz.

Instrument Configuration and Operating Status Settings

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands