manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 86

Numeric Measurement Modes

R&S

®

EVSF1000

86

User Manual 1178.6410.02 ─ 05

GET_TX1_LEVEL

 

on page 239

GET_TX2_LEVEL

 

on page 239

6.4.1.2

 

IF Spectrum Preview

A preview of the measured spectrum (power level vs. frequency) for the IF (intermedi-
ate frequency) signal is provided. The center frequency is the nominal channel fre-
quency. The frequency range shows the measured bandwidth. The power range is
selected such that the noise level remains visible.

Figure 6-20: IF spectrum preview

This preview spectrum allows you to check if the current measurement settings are
appropriate, such as the bandwidth or frequency offsets. For a larger, more detailed
spectrum diagram, select one of the graphical Spectrum modes. If you switch to such a
mode directly from a numeric measurement mode, the current measurement settings
are applied to the spectrum automatically.

6.4.1.3

 

COM Main View

The COM Main view provides the following measurement results:

COM Mode (Option R&S

 

EVSG-K6)

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands