manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 261

Remote Commands

R&S

®

EVSF1000

261

User Manual 1178.6410.02 ─ 05

Return values: 

<State>

READY.

The command was executed successfully.

Example: 

SCOPE_ATTMODE LD

Manual operation: 

See 

"RF Att"

 

on page 52

See 

"RF Mode"

 

on page 53

SCOPE_FREQRF?
SCOPE_FREQRF 

<Freq>

This command gets or sets the RF frequency in "AF Time Domain ".

Parameters:

<Freq>

RF frequency
Default unit: <kHz>

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"RF Freq"

 

on page 109

SCOPE_REFLEVEL?
SCOPE_REFLEVEL 

<RefLev>

This command gets or sets the reference level of the "AF Time Domain" mode.

Parameters:

<RefLev>

Set the reference level.
Default unit: <dBm>

Return values: 

<State>

READY.

The command was executed successfully.

SCOPE_TIMEDIV_RF?
SCOPE_TIMEDIV_RF 

<time/div>

This command gets or sets the Time/Div for RF input in "AF Time Domain" mode.

Parameters:

<time/div>

Set value for the Time/Div for RF input.

100_MS

Sets the value to 100 ms.

50_MS

Sets the value to 50 ms.

20_MS

Sets the value to 20 ms.

10_MS

Sets the value to 10 ms.

AF Time Domain Mode

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands