manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 191

Remote Commands

R&S

®

EVSF1000

191

User Manual 1178.6410.02 ─ 05

Return values: 

<State>

READY.

The command was executed successfully.

SETUP:SPEAKER 

<State>

This command activates/deactivates the speaker.

Parameters:

<State>

ON | OFF

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"Speaker"

 

on page 167

SETUP:VOLUME 

<output volume>

This command specifies the AF output volume.

Parameters:

<output volume>

Range: 

0 to 100

Default unit: %

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"AF Volume"

 

on page 166

SQUELCH?
SQUELCH 

<Level>

This command gets or sets the squelch level of the active mode ("ILS LOC","ILS GP",
"ILS MB", "VOR" or "COM" mode).

Parameters:

<Level> 

Squelch level of active mode
Default unit: dBm

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"Squelch"

 

on page 166

12.1.5

 

Retrieving Instrument Information

The following commands are required to retrieve information on the instrument and
operation status.

Common Instrument and Measurement Setup

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands