Rohde & Schwarz EVSF1000 User Manual Download Page 2

Page: 2 / 295

This document describes the following R&S

EVSF1000 models with the firmware version 1.20 and later:

●

R&S

EVSF1000 (1330.0008.02)

Furthermore, it covers the following options:

●

R&S

EVSF1-B4 Slide-in option (1330.1404.02)

●

R&S

EVSF1-Z1 Tray (1330.1410.02)

●

R&S

EVSF1-Z2 Test adapter (1330.1427.02)

●

R&S

EVSG-K1 ILS CRS/CLR Analysis (1329.9005.02)

●

R&S

EVSG-K2 VOR Analysis (1329.9011.02)

●

R&S

EVSG-K3 MB Analysis (1329.9028.02)

●

R&S

EVSG1000-K4 GBAS Analysis (1329.9034.02)

●

R&S

EVSG1000-K5 SCAT-I Analysis (1329.9040.02)

●

R&S

EVSG-K6 COM Analysis (1329.9057.02)

●

R&S

EVSG-K10 RF Spectrum Analysis (1329.9063.02)

●

R&S

EVSG-K11 AF Spectrum Analysis (1329.9070.02)

© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email:

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1178.6410.02 | Version 05 | R&S

EVSF1000

Throughout this manual, products from Rohde & Schwarz are indicated without the

symbol , e.g. R&S

EVSF1000 is indicated as

R&S

EVSF1000.

Summary of Contents for EVSF1000








































































































































































































































































































Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSF1000, User Manual

Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands