Rohde & Schwarz EVSF1000 User Manual Download Page 48

Page: 48 / 295

Numeric Measurement Modes

R&S

EVSF1000

User Manual 1178.6410.02 ─ 05

6.1.3.6

ILS Localizer Recording View

The Recording view displays the recorded data for ILS Localizer measurements from
the selected data list (see

"List"

on page 161). If available, the stored GPS data from

the GPS receiver is also displayed.

Which measurement results are stored is described in the remote commands, see

GETDATADEF

on page 268.

The individual measurement results are described in the result views.

For details on data logging see

Chapter 10.2, "Recording Measurement Data"

on page 159.

Remote commands to retrieve data:

6.1.4

ILS Localizer and Glidepath Configuration

The following settings are available for the ILS Localizer and Glidepath measurements.

ILS Localizer and ILS Glidepath (GP) Modes

Summary of Contents for EVSF1000








































































































































































































































































































Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSF1000, User Manual

Search results

Summary of Contents for EVSF1000

Reviews:

Brands by name

Popular brands