manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 63

Numeric Measurement Modes

R&S

®

EVSF1000

63

User Manual 1178.6410.02 ─ 05

6.2.2.5

 

ILS Marker Beacon Recording View

The Recording view displays the recorded data for ILS Localizer measurements from
the selected data list (see 

"List"

 

on page 161). If available, the stored GPS data from

the GPS receiver is also displayed.

Which measurement results are stored is described in the remote commands, see

GETDATADEF

 

on page 268.

The individual measurement results are described in the other ILS Marker Beacon
result views.

For details on data logging see 

Chapter 10.2, "Recording Measurement Data"

,

on page 159.

6.2.3

 

Configuring ILS Marker Beacon Measurements

The following settings are available for the ILS Marker Beacon measurement.

Settings for recording, including trigger settings, are described in 

Chapter 10.2,

"Recording Measurement Data"

, 

on page 159.

ILS Marker Beacon Mode (Option R&S

 

EVSG-K3)

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands