Rohde & Schwarz EVSF1000, User Manual

Page: 157 / 295

Data Management
R&S
®
EVSF1000
157 User Manual 1178.6410.02 ─ 05
10 Data Management
The R&S EVSF1000 allows you to store and load measurement settings, and export
measurement data for analysis later. Finally, you can store the measurement results
displayed on the screen.
● Storing and Recalling Measurement Settings (Preset) ......................................... 157
● Recording Measurement Data .............................................................................. 159
● Creating and Storing Screenshots ........................................................................ 163
10.1 Storing and Recalling Measurement Settings (Preset)
Possibly you would like to restore or repeat a measurement you performed under spe-
cific conditions on the R&S
EVSF1000. Or you would like to troubleshoot a measure-
ment and require a defined instrument state to detect the precise cause of the error. In
these cases, you can store and recall instrument and measurement settings. Up to 20
different settings, referred to as
UserPresets can be stored and recalled on the instru-
ment.
Settings stored in a UserPreset
In each UserPreset, the following current settings are stored:
●
All measurement settings (see Chapter 4, "Measurements and Results" ,
on page 30)
●
All general instrument settings except for the network settings (see Chapter 11,
"Common Instrument Settings" , on page 166)
●
Date and time of storage
The list of UserPresets and the corresponding functions are available in the [Preset]
softkey menu.
● Storage and Recall Functions ...............................................................................157
10.1.1 Storage and Recall Functions
VNC access : [y]
For each stored UserPreset, the storage date and time are indicated in the "Preset"
window. Empty UserPresets are indicated as "not used".
Storing and Recalling Measurement Settings (Preset)