manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 22

Getting Started

R&S

®

EVSF1000

22

User Manual 1178.6410.02 ─ 05

3.4

 

Operating Basics

The R&S

 

EVSF1000 is designed for flight inspection and is thus optimized for remote

operation, via predefined commands. It does not have a graphical user interface for
manual interaction.

Nevertheless, the instrument can also be controlled manually, by simulating a user
interface on a remotely connected device, and using a connected keyboard. Basic
operation and status information is also available on a mini display directly on the
R&S

 

EVSF1000.

3.4.1

 

Basic Configuration and Status Display

In order to connect to the R&S

 

EVSF1000 from a remote PC, you require connection

information, such as the IP address. It is also helpful to obtain the operating status of
the instrument before connecting to it. This basic information is displayed in the mini
display directly on the R&S

 

EVSF1000.

Figure 3-6: R&S

 

EVSF1000 mini display

The following information is displayed in the mini display.

Operating Basics

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands