Publication No. 980935 Rev. A
3152B User Manual
Figure 3-1, ArbConnection Example of a Complex Waveform
Memory
Management
Commands
Creating Memory Segments
Segments are defined using the following command:
trac:def 1,2000
Defines segment #1 as having 2,000
sample points. Any waveform
downloaded to this segment must
have exactly 2,000 data points.
This command has two variables: segment number and segment
size. Note that numbers, not names, are assigned to segments.
Segment numbers range from 1 through 16,384. You may define
the segments in any order. For example, you may define segment
#3, then segment #1, and then later define segment #2. You may
not change the size of a segment once you have defined it.
You cannot query the segment definition parameters, so make sure
you keep track of them if you intend to partition the memory into
many segments.
EADS North America Test and Services
Operation 3-19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com