3152B User Manual
Publication No. 980935 Rev. A
1-12 Introduction
EADS North America Test and Services
Options
The 3100M-3152B and 3100R-3152B are available in two memory
configurations. Compare the option number printed on the
instrument to verify which option was installed at the factory.
Contact your nearest EADS North America Test and Services
representative if the number printed on the case does not reflect
the version ordered. The list of options is given below:
-001
- 3152B - basic instrument, with 1MB RAM. This designates
the standard memory size supplied with the 3152B.
-004
- 3152B - basic instrument, with 4MB RAM. This designates
memory expansion to 4 meg waveform data points.
Supplied
Accessories
The instrument is supplied with a CD containing the instruction
manual, ArbConnection for Windows 2000/XP/NT, and VXI plug &
play soft front panel and drivers.
Front Panel
Connectors
The
3151B
has five BNC connectors on its front panel, marked as
follows:
•
OUTPUT: The main output signal
•
SYNC OUT: A digital signal in sync with the main output
•
TRIG/PLL IN: Trigger input
•
CLOCK IN: An ECL level external sample clock input
•
REF IN: TTL level 10 MHz reference input
The
3152B
has five BNC connectors on its front panel, marked as
follows:
•
OUTPUT: The main output signal
•
SYNC OUT: A digital signal in sync with the main output
•
TRIG/PLL IN: Trigger input; also used to lock the 3152B to an
external signal
•
CLOCK IN: An ECL level external sample clock input
•
PM IN: Phase control input for use in PLL mode
The
3100R-3152B
has three BNC and two SMB connectors on its
front panel, marked as follows:
•
OUT (BNC): The main output signal
•
SYNC (BNC): A digital signal in sync with the main output
•
TRIG/PLL (BNC): Trigger input; also used to lock to an external
signal
•
EXT SCLK: An ECL level external sample clock input
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
