Publication No. 980935 Rev. A
3152B User Manual
EADS North America Test and Services
Programming Reference 5-29
OUTPut:FILTer {OFF|ON|0|1}(?)
HS Syntax: 0202A<0|1>(?)
Description
This command toggles selection of the filter selected by the OUTP:FILT command. Note that the filters are
not accessible during standard sine waveform output. In order to control filters, change the output waveform
function to another waveform type to allow this command to execute.
Parameters
Range
Type
Default
Description
0-1
Discrete
0
Toggles selection of the selected output filter
Response
The 3152B returns 1 if a filter is enabled or 0 if a filter is disabled
OUTPut:LOAD <load>?
HS Syntax: 0012A<integer>(?)
Description
This command specifies the load impedance to be applied to the 3152B main output.
Parameters
Name
Type
Default
Description
<load>
Numeric (integer
only)
50
Specifies the load impedance that will be applied to the
3152B outputs in units of
Ω
. The default setting is 50
Ω
.
The range of load impedance is 50
Ω
to 1 M
Ω
. Accurate
specification of the load impedance is required to
automatically apply the programmed amplitude level at
the load.
OUTPut {OFF|ON|0|1}(?)
HS Syntax: 0200A<0|1>(?)
Description
This command toggles the 3152B output relay. Note that for safety, the outputs always defaults to off, even if
the last instrument setting before power down was on.
Parameters
Range
Type
Default
Description
0-1
Discrete
0
Toggles the output relay between on and off
Response
The 3152B returns 1 if the output is on or 0 if the output is off.
OUTPut:SYNC {OFF|ON|0|1}(?)
HS Syntax: 0241A<0|1>(?)
Description
This command toggles the 3152B SYNC output. Note that for safety, the SYNC output always defaults to off,
even if the last instrument setting before power down was on.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
