Publication No. 980935 Rev. A
3152B User Manual
Figure 4-21, Digital Pulse Generator Panel
State
The State Group has a control to enable or disable the pulse
generator function. Note that when the pulse generator function is
enabled, all other waveform generation features of the 3152B are
disabled.
Pulse Mode
The Pulse Mode group has controls to toggle between single and
double pulse modes.
Polarity
The Polarity group has controls to select the pulse polarity from one
of the Normal, Complemented and Inverted options.
Pulse Parameters
All parameters that control the pulse timing are available in the
Pulse Parameters group. These include: Period, Rise, High and Fall
Times, High and Low levels and single or double pulse Delays.
To display and modify parameters, click on the LED next to the
required parameter change and modify the time as required. The
range of each parameter is specified in Appendix A.
X-Instrument Sync
The X-Instruments Synchronization table provides a fast and easy
method of synchronizing modules that reside within a single VXI
mainframe. ArbConnection finds 3152Bs which may be
synchronized and allows the selection of groups and
synchronization paths and allows the setting of phase offsets
between modules.
Figure 4-22 shows a list of modules that were detected by
ArbConnection and listed in the Instruments Pool. This list can now
be manipulated to form one or more groups of synchronized
EADS North America Test and Services
ArbConnection 4-31
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
