![background image](http://html1.mh-extra.com/html/racal-instruments/3152b/3152b_user-manual_3131191150.webp)
Publication No. 980935 Rev. A
3152B User Manual
takes you back to the Panels screen. If you made changes to your
pulse since it was last saved, the Pulse Composer will prompt you
to Save or Abandon changes these changes.
Edit Menu
The Edit menu isused for adding or removing pulse train sections.
Use these commands to Append, Delete, Insert, or Undo last
operation. The editing commands are explained in the following
paragraphs.
Append Section
The Append Section menu command lets you append a new
section at the end of the pulse train. Only one new section can be
appended at the end of the train. If an empty section already exists,
the append command will give an error. New sections are always
appended at the end of the pulse train.
Insert Section
The insert Section menu command lets you insert a new section in
between sections that were already designed. Only one new
section can be inserted at the middle of the train. If an empty
section already exists, the insert command will give an error.
Delete Section
The Delete Section menu command lets you remove sections from
the pulse train without affecting the rest of the train. If you use this
command from the Edit menu, make sure that the section you want
to remove is currently the active section.
Remove all Sections
The Remove all Sections menu command lets you remove the
entire pulse design from the pulse screen and start with a fresh
page.
Undo
The Undo command reverses the last editing operation. This
command is extremely useful in cases where you unintentionally
delete a section from the pulse train and want to restore it to the
pulse graph.
View Menu
The View menu lets you view various sections of the pulse graph.
The View menu include: Pulse Editor, Full Train, Single Sections,
and Options. Descriptions of the view menu items are given below.
Pulse Editor
The view Pulse Editor menu item invokes a dialog box as shown in
Figure 4-44. In general, the Pulse Editor is used for placing straight
line segments on the screen in intervals that define pulse width,
rise/fall time, and amplitude. Information how to use the Pulse
Editor to create pulse trains is given later in this chapter.
Full Train
The view Full Train menu item shows on the pulse graph all
EADS North America Test and Services
ArbConnection 4-59
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com