Publication No. 980935 Rev. A
3152B User Manual
EADS North America Test and Services
Programming Reference 5-23
Instrument &
Output Control
Commands
This group is used to control the output channels and their respective
state, amplitude and offset settings, as well as the waveform mode.
You can also synchronize multiple instruments and program phase
offsets between adjacent channels. The output frequency and the
reference source are also selected using commands from this group.
Factory defaults after *RST are shown in the Default column.
Parameter range and low and high limits are listed, where applicable.
The 3152A column shows where 3152B commands are backward-
compatible with the older 3152A design.
Table 5-3, Instrument & Output Control Commands Summary
Keyword
Parameter Form
Default
3152A
HS
:INSTrument
:MODE
NORMal
|
FAST
NORM
9
0150A
[:SELect]
1 | 2
1
0008A
:COUPle
:MODE
MASTer
|
SLAVe
MAST
0002A
:DELay
0
to
20
0
0003A
:PATH
ADJacent | ECLT | LBUS
ADJ
0191A
:SLAVe
:DELete
<LAN_IP_address>
00040
:INSert
<3152B>,<LAN_IP_address>
00051
:STATe
OFF | ON | 0 | 1
0
0006A
:OUTPut
:ECLTrg<n>
<n> = 0 to 1
[:STATe]
OFF | ON | 0 | 1
0,0
9
0210B
:FILTer
[:LPASs]
:FREQuency
25M | 50M | 60M | 120M
25M
0201A
[:STATe]
OFF | ON | 0 | 1
0
9
0202A
:LOAD
50 to 1e6
50
0012A
[:STATe]
OFF | ON | 0 | 1
0
9
0200A
:SYNC
[:STATe]
OFF | ON | 0 | 1
0
9
0241A
:POSition
[:POINt]
0 to 1e6-1 (0 to 2/4e6-1 with option 1/2)
0
9
0242A
:SOURce
BIT | LCOMplete | SSYNc | HCLock | PULSe |
ZEROcross
BIT
0240A
:WIDTh
4 to n-8
4
0243A
:TRIGger
9
:SOURce
BIT | LCOMPlete | SSYnc | HCLock | PULSe |
ZEROcross | INTernal | EXTernal
BIT
0220A
:TTLTrg<n>
<n> = 0 to 7
[:STATe]
OFF | ON | 0 | 1
0,0
9
0230B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com