168
Advanced Mode
The advanced mode consists of the event and action sections. Define the action to
take for each event triggered on the IP cameras or the video servers connected to the
NVR.
To configure the advanced event management by the ‘Advanced Mode’, select an
event type on the left event list and configure the actions to take on the right.
Note:
Click ‘Apply’ to apply
the settings or ‘Exit’ to exit the settings page. If the
‘Advanced Mode’ is selected on the ‘Alarm Settings’ page, the advanced settings
will be applied after the NVR restarts even if you have selected to exit the settings
page. The settings will be cancelled if ‘Traditional Mode’ is selected after exiting
the ‘Advanced Mode’.
To avoid blocking by the firewall, the IP cameras or the video servers configured
for the alarm recording must be located on the same subnet as the NVR.
To switch from the advanced mode to the traditional mode, select ‘Traditional
Mode’ and click ‘Apply’.
Events:
The events supported by the NVR are classified as camera events (motion detection,
alarm input, camera disconnection), NVR events (recording failure), and external
events (user-defined events).
Note:
The camera events available depend on the features supported by the IP
cameras or video servers.
Summary of Contents for VIOSTOR
