QNAP VIOSTOR User Manual Download Page 214

Page: 214 / 387

214

Configure backup duration and files
If the backup duration settings are not changed, the system will back up all

of the recording files on the specified days by default.



Set the number of days that the latest recordings should be backed up.
If 3 days are entered, the recordings of today, yesterday and the day

before yesterday will be backed up.



Or set the time period for backup.



You can click “Backup duration and files” to configure the backup
duration and files.

Enable “Include auto snapshots” to also copy the auto snapshot files

when the recordings are configured to back up.

Click “Next”.

If you choose “Schedule,” you can configure the backup settings as below.

Summary of Contents for VIOSTOR



































































































































































































































































































































































































Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands

QNAP VIOSTOR, User Manual

Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands