QNAP VIOSTOR User Manual Download Page 221

Page: 221 / 387

221

8.3

Remote Replication

Use the remote replication feature to copy the recording data of the local NVR to a

remote QNAP network attached storage (NAS). The remote QNAP NAS is hereafter
referred to as ‘the remote storage device’.

Note:

Before using this function, make sure the Microsoft networking service of the

remote storage device is enabled, and the corresponding path and user access right
has been correctly configured.

Enable remote replication (supports multiple choices)

In the above example, the NVR only copies the alarm recording data of the latest

3 days to the remote storage device.



Select ‘Enable remote replication’ to activate this feature. The NVR will execute

an automatic backup of the recording data to the remote storage device

according to the settings.

Summary of Contents for VIOSTOR



































































































































































































































































































































































































Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands

QNAP VIOSTOR, User Manual

Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands