QNAP VIOSTOR, User Manual

Page: 170 / 387

170
2. Alarm input
This option allows the NVR to trigger an action when the alarm input of the IP
camera or the video server is triggered. Select ‘Camera event’ from the ‘Event
List’. Locate the channel which supports alarm input and click ‘Alarm Input’.
Next, click the edit button, enable this option, configure the settings, and click
‘Apply’. Set the schedule to define the active period of the alarm settings.
After that, define the action on the right (discussed in the later sections).
3. Alarm event
The alarm input and the motion detection settings of some IP cameras or video
servers may be combined together and called ‘Alarm Event’ on the Event List.
Edit the event settings and define the action on the right (discussed in the later
sections).
4. Connection failure
This option allows the NVR to trigger an action when the IP camera or the video
server is disconnected. Select ‘Camera Event’ from the ‘Event List’. Locate
the channel and click ‘Connection Failure’. After that, define the action on the