QNAP VIOSTOR User Manual Download Page 84

Page: 84 / 387

view the alert details.

Dual-display mode:

The NVR supports dual-display mode. (This

function can only be used when the computer or the
host is connected to multiple monitors.)

Server list:

Up to 128 channels from multiple QNAP NVR servers
can be monitored.

E-map:

Upload E-map(s) and indicate the locations of the IP
cameras.

The administrators are allowed to edit

and view the E-map(s). Other users can only view
the E-map(s).

Options:

Configure the advanced settings of the monitoring
page. Specify the source of the video/audio

stream, event notification, and snapshot folder.

Note:



Click the event notification icon to view the event details, enable or disable the

alert sound or clear the event logs.

Summary of Contents for VIOSTOR



































































































































































































































































































































































































Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands

QNAP VIOSTOR, User Manual

Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands