QNAP VIOSTOR User Manual Download Page 131

Page: 131 / 387

131

6.1.3

Export NVR Videos

To convert the video files on the NVR and export the file, please follow the steps
below.

Select an IP camera and click

to ‘Convert to AVI file’.

Select recording type, start time and end time for video exporting.

Choose the recording type.

Specify the time range. Specify a smaller time range, or the video file will
be too large and take a long time to convert.

You can specify the location where the file will be saved on client PC or to the

NVR.

Enter the file name.

You can modify the export options.

Summary of Contents for VIOSTOR



































































































































































































































































































































































































Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands

QNAP VIOSTOR, User Manual

Search results

Summary of Contents for VIOSTOR

Reviews:

Related manuals for VIOSTOR

Brands by name

Popular brands