Printronix P8000 Series, Administrator'S Manual

Page: 63 / 422

Saving Your New Configuration
63
Saving Your New Configuration
The Save Config. option allows you to save up to eight custom configurations
to meet different print job requirements. Once you have changed all of the
necessary parameters, you may save them as a numbered configuration
(Example 1 on page 64) or a named configuration (Example 2 on page 66)
that can be stored and loaded later for future use. If you do not save your
configuration using the Auto Save, or this option, all of your parameter
changes will be erased when you power off the printer.
Once you have saved a custom configuration using this option, it will not be
lost if you power off the printer. You can load a configuration for a specific
print job (see “Load Config.” on page 91). You can also modify and resave it.
You may want to print your configurations (see “Print Config.” on page 91)
and store them in a safe place, such as inside the printer cabinet. If the
Protect Configs. parameter is enabled and you try to resave an existing
configuration, the new configuration will not be saved until the existing
configuration has been deleted (see “Delete Config.” on page 92).
NOTE: Once you change active emulations, any changes to the previously
selected emulation will be gone unless they have been saved.