Printronix P8000 Series, Administrator'S Manual

Page: 199 / 422

IPDS Emulation
199
Graphics Quality
This parameter chooses the print quality of graphics.
•
High (factory default). Graphics are printed at 144 dot rows per inch.
•
Select By Host . The application decides the quality of the graphics.
•
Low . Graphics are printed at 72 dot rows per inch.
Barcode Quality
This parameter chooses the horizontal print quality of barcode labels.
•
High (factory default). Label is printed at 144 dots per inch.
•
Select By Host . The application decides the quality of the labels.
•
Low . Label is printed at 72 dots per inch.
Barcode Speed
This parameter chooses the vertical print quality of barcode labels.
•
High (factory default). Barcodes are printed with less vertical dots,
increasing printing speed, but decreasing print quality.
•
Select By Host . The application decides the quality of the labels.
•
Low . Barcodes are printed with more vertical dots, decreasing printing
speed, but increasing print quality.
Barcode Size
This parameter will emulate the barcode sizes of the selected printer model.
•
4234 (factory default). IBM 4234
•
67XX . Decision Data 67XX
•
64XX . IBM 6400 series
•
4224 . IBM 4224
Early Print Comp (Complete)
This parameter chooses when to send a Print Comp to the controller.
•
Off (factory default). Print Comp is sent if page is printed completely.
•
On . Print Comp is sent immediately. The next page will be created. This
improves the print performance when starting the next page.
NOTE: When Early Print Comp is enabled and an error occurs, you may lose
data.