Printronix P8000 Series, Administrator'S Manual

Page: 213 / 422

Arabic Context Analyzer
213
Automatic Line Feed
When Auto LF is enabled, the analyzer sends the printer a Line Feed each
time it receives a Carriage Return. The default is Disabled.
NOTE: When you want to enable the Auto Line Feed (Auto LF), use the item
under the analyzer menu not the one under the LinePrinter Plus
menu as long as the analyzer is active.
PUM (Position Unit Mode)
This menu only has an effect when the Analyzer emulation is set to ANSI. It
has two different possible values:
•
Decipoints (factory default). The printer interprets ANSI escape
sequence parameters as decipoint values.
•
Lines/Columns . The printer interprets ANSI escape sequence
parameters as line or column counts.
Default Data Processing
Your printer has two “Data Process” typefaces: Normal & Enhanced. This
menu item is effective when using the Arabic Windows Driver:
•
Data Processing . The normal typeface used for Data Processing.
•
Enhanced DP (factory default). This version of Data Processing typeface is
printed at a lower speed than the normal “Data Process” typeface.
However, the “Enhanced DP” is a better quality than the normal “Data
Process” typeface.
NOTE: When using SEDCO Windows printer driver, all menu items under the
analyzer are ignored except for this menu item. If the “Printer Font
Name” in the driver properties under “Device Settings” is set to “Data
Process”, then the value of “Default DP” menu item selects between
the “Data Processing” and “DP Enhanced” typefaces.
Wrap Around
When the user sends a long line (longer than what the printer expects) to the
printer, the remaining characters will be printed on the next line if the Wrap
Around menu item is enabled. If this item is disabled the printer will not print
the rest of the line. The default is Disabled.
Form Feed Absorb
When Form Feed Absorb is enabled and a form feed character (0C hex) is
received, it will not have an effect. If Form Feed Absorb is disabled, then a
form feed character will advance the paper to the next top of form, and move
the logical print position to the first character column. The default is Disabled.
Custom Settings
This menu item should be set to zero for normal behavior. To use UTF-8 as
your Right Code Set, set the “Custom Settings” to three. The default is Zero.
Arabic Context Analyzer