Printing a Hex Dump
313
SD WRITE FAIL
WRITE PROTECTED
Check SD Card
Yes
A write operation to the
SD has failed because
the SD card is write
protected.
Ensure that the write protect
tab on the SD card is not
active. If the write protect tab
is not active, use another SD
card.
SD WRITING
Do not Remove
Yes
The SD card is currently
writing or erasing files.
Wait until the write or erase
operation completes.
SDSC CARD
NOT SUPPORTED
Remove SD Card
Yes
The printer has been
powered up with an
SDSC card, and SDSC
cards (< 4 GB) are not
supported.
Power down, remove SD card,
and insert an SDHC card in
the printer.
SECURITY VIOLATION*
No
Security code of PAL on
controller board does not
match code of firmware
on the controller board.
Contact your authorized
service representative.
1
SECURITY KEY NOT
DETECTED
No
The security key is not
present or has failed.
Contact your authorized
service representative.
1
SF ERROR
No
Structured Field Error.
Application software has
violated structured data
field parameters.
Not a printer problem. Have
the system administrator
correct applications data or
configuration.
SHUT DRVR CIR*
See User Manual
No
The shuttle driver circuit
on the controller board is
drawing too much
current.
Contact your authorized
service representative.
1
SHUTL INV CMD*
No
Shuttle Invalid
Command. Firmware
error on controller board.
Contact your authorized
service representative.
1
SHUTL INV PARM*
No
Shuttle Invalid
Parameter. Firmware
error on controller board.
Contact your authorized
service representative.
1
SHUTL OVR SPEED*
No
The shuttle is oscillating
too rapidly.
Contact your authorized
service representative.
1
SHUTTLE JAM
Yes
No shuttle movement or
shuttle moving at the
wrong speed.
Check for obstruction to
shuttle, a twisted ribbon, or
platen lever closed too tightly.
If fault source is not apparent,
contact your authorized
service representative.
1
Table 1. LCD Message Troubleshooting Table (ASCII)
Displayed Message
Can User
Correct?
Explanation
Solution
Fault Messages (ASCII in Alphabetical Order)
Summary of Contents for P8000 Series
