Printronix P8000 Series, Administrator'S Manual

Page: 189 / 422

IGP/VGL Submenu
189
Truncate Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form. The options include:
•
Enable (factory default)
•
Disable
True Vert 1/10
•
Disable (factory default). A vertical 1/10 of an inch parameter is used as
7/72 of an inch. The absolute move is slightly smaller than expected. For
example, a one-inch move would be 70/72 of an inch. Vertical moves that
have the same value are identical in length.
•
Enable . A vertical 1/10 inch parameter is used as 1/10 inch. Rounding
occurs to the nearest 1/72 inch. This can cause vertical moves that have
the same value to differ by
±
1/72 inch.
Absorb After ^PY
•
Absorb Motion (factory default). The first paper motion following a ^PY
command is ignored.
•
Absorb All . The system ignores all the data and terminator until a host
generated motion terminator is detected.
•
Disable. System terminators following a graphics command are sent to
the printer and result in paper motion.
UPC Descenders
•
Enable (factory default). UPC/EAN barcodes are printed with
descenders, even if there is no human readable data.
•
Disable . UPC/EAN barcodes are printed without descenders if there is no
human readable data.
Rot. Char Size
•
Adjusted (factory default). Rotated (clockwise/counterclockwise),
expanded characters have a different size than an unrotated character
with the same size parameters.
•
Not Adjusted . Rotated, expanded characters are the same size as
unrotated characters with the same size parameters.
Ignore Spaces
•
Disable (factory default). Trailing spaces are not deleted from the last
alphanumeric element in a graphics pass.
•
Enable . Trailing spaces are deleted from the last alphanumeric element
in a graphics pass.