Printronix P8000 Series, Administrator'S Manual

Page: 238 / 422

238
Chapter 4
ADVANCED USER Menu
SD File System
The SD File System menu appears if an SD card is inserted in the printer
before power-up. The SD File System applies only the SD card’s root
directory.
IMPORTANT
If you remove or insert the SD card after the printer is powered on, an
error will occur.
•
Overwrite Files . Prevents SD files from being overwritten by disabling
the overwrite function.
•
View SD Files . Displays the list of files on the SD card (root directory).
Press the ENTER key to go into the submenu, then press the UP or
DOWN keys to view the different SD file names and size.
•
Delete SD Files . Displays the list of SD files on the SD card (root
directory). Press the LEFT or RIGHT keys to select the desired file to
delete. Pressing the ENTER key deletes the file displayed on the control
panel.
•
SD Flash Avail . The amount of SD memory available for the user to save
or download files into the SD card.
•
Copy From SD . Copies selected files from the SD card (root directory) to
the Main File System.
•
Print File List . Prints a summary of the files stored on the SD card (root
directory) and several statistics on the SD File System usage.
•
Update QCMC . This menu can be used to update the configuration within
the QCMC image stored on the SD card (see Appendix E, “Quick Change
Memory Cartridge”).
•
Erase QCMC. This menu can be used to erase the QCMC image stored
on the SD card (see Appendix E, “Quick Change Memory Cartridge”).
Set Sharing
This option allows character sets to be shared between the active LP+
protocol and the active IGP emulation.
Changing characters sets in LP+ causes the active IGP to change to the
same character set if the selected set exists in IGP. If the active IGP has no
access to the selected set, no changes are made. Selecting a new character
set in the active IGP causes the LP+ to change to the same character set if
the selected character set exists in the active LP+ protocol. Not all sets are
shared between emulations in the Standard group of character sets. As a
result, selecting a set in the Standard group of LP+ or IGP emulation may or
may not cause the other emulation to have the same set.
NOTE: The Set Sharing front panel option has no effect on the LP+ build.
The option only applies to the builds with IGP.
This option is not available in the PCL-II or LG emulation.
Shuttle Timeout
The amount of time the shuttle continues moving after no data is received. If
your host is slow, setting the number to a higher value will prevent the printer
from spending time shuttling up and down between data bursts.