Printronix P8000 Series, Administrator'S Manual

Page: 281 / 422

Sending Firmware via Serial
281
A notification displays indicating that the web page will refresh upon download
completion.
Figure 19. File Download Notification
PTX_SETUP Download
Use PTX_SETUP to load files into the Main File System. Refer to the
PTX_SETUP Chapter in the
PGL Programmer’s Reference Manual for
details.
Example loading a font named ARIAL.TTF:
!PTX_SETUP
FILE_IO-CAPTURE;“ARIAL.TTF”
PTX_END
Arial TrueType font binary data.
NOTE: DO NOT add LF/FF to the end of the binary data.
!PTX_SETUP
FILE_IO-CAPTURE;””
PTX_END
Manual Two-Key Download
1. Start a Windows Command Prompt session.
2. Navigate to the directory with the target file (e.g., c:\download).
3. Copy cnvt2fls.exe from your Starter Kit CD to the directory with the target
file.
4. Convert the file to a downloadable format using the following command at
the command prompt:
cnvt2fls file_name1 file_name2 file_name3 A FONT <Enter>
where
•
file_name1 is the name of the file to be converted into the downloadable
format.
•
file_name2 is the name of the file of the output file that will be downloaded
into the printer.