Printronix P8000 Series, Administrator'S Manual

Page: 62 / 422

62
Chapter 4
Top Level Menu Overview
Auto Save Configuration
If the user makes a menu change and attempts to place the printer online
without saving the changes to a configuration, the following prompt displays:
The active option is highlighted. Use the Up and Down keys to scroll through
the different options; the keys will loop at the top and bottom options. The
↵
(Enter) key selects the highlighted option. After performing the selected
option, the printer will go to Online mode.
NOTE: Only the Up, Down, and Enter keys work at the Menu Changes
Detected prompt.
•
Save Permanently (factory default). This option causes the printer to
save the configuration to the active configuration and make the active
configuration the Power-Up default configuration. If the active
configuration is the Factory Configuration, the printer will save the
configuration to an open configuration and make that open configuration
the Power-Up default configuration.
If no open configuration is available, the user must decide which
configuration to overwrite. In this case the printer will display the Save
Configuration menu, otherwise, the printer will go Online.
•
Save Temporarily . Menu changes will be implemented, but will not be
saved once the printer is powered off.
•
Cancel Changes . This option causes the printer to reload the Active
Configuration, then go Online.
•
Restore Factory . This option will cause the printer to reload the Factory
Configuration, then go Online.
NOTE: A printer fault during the Auto Save process causes the printer to
Save Temporarily.