Printronix P8000 Series, Administrator'S Manual

Page: 105 / 422

Ethernet Address
105
Framing Errors
Possible errors that can occur when the printer’s serial interface settings do
not match those of the host computer.
•
Enable (factory default). If a framing error occurs, a fault message will
display on the control panel.
•
Disable . If a framing error occurs, a fault message will not display on the
control panel.
Offline Process
•
Disable (factory default). When set to disable, the printer does not
process serial data while in offline mode.
•
Enable . When set to enable, the printer continues to process without
printing the current serial job while the printer is offline until the printer’s
buffer is full.
NETWORK SETUP Menu
Ethernet Address
NETWORK
SETUP
(from page 73
to 80)
Ethernet
Params
1
See page 107.
Ethernet
Address
1
See section below.
1
Only if the Integrated Ethernet feature is installed.
Ethernet
Address
(from page 105)
IP Address Subnet
Mask
xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx hhhhhhhhhhhh
* = Factory Default
Gateway
Address
MAC
Address
IP
Assignment
DHCP
Disable
Enable*
BootP
Disable*
Enable
NETWORK SETUP Menu