Printronix P8000 Series, Administrator'S Manual

Page: 91 / 422

OpenPrint P8000 HD Postscript/PDF Firmware
91
CONFIG. CONTROL Menu
The CONFIG. CONTROL menu allows you to control your printer’s
configurations according to the specifications necessary for your print jobs.
Load Config.
The printer can store numerous configurations in memory. This parameter
allows you to select and load a specific configuration.
Save Config.
This option allows you to save up to eight configurations to meet different print
job requirements. This eliminates the need to change the parameter settings
for each new job. The configurations are stored in memory and will not be lost
if you turn off the printer. If the Protect Configs. parameter is enabled, the new
configuration will not be saved unless the existing configuration has been
deleted first. The factory default configuration cannot be changed. See
“Saving Your New Configuration” on page 63 for details.
Print Config.
This option is used to print a listing of various stored printer configurations.
Store printouts of your configurations in a safe place for quick referral.
Load
Config.
Save
Config.
Print
Config.
Delete
Config.
Power-Up
Config.
Protect
Configs.
Name
Configs
Factory*
Cfg 1 - Cfg 8
Cfg 1*
Cfg 2 - Cfg 8
Current Short*
Current Full
Factory
Power-Up
All
Cfg 1 - Cfg 8
All*
Cfg 1 - Cfg 8
Factory*
Cfg 1 - Cfg 8
Disable*
Enable
(see Example
2 on page 66)
* = Factory Default
Reset Cfg
Names
Cfg 1*
Cfg 2 - Cfg 8
All
Auto Save
Enable*
Disable
CONFIG.
CONTROL
(from page 73,
74, 75, 76, 77,
78, and 79)
CONFIG. CONTROL Menu