Printronix P8000 Series, Administrator'S Manual

Page: 138 / 422

138
Chapter 4
EMULATION Menu
Font Attributes
Typeface (ASCII)
NOTE: Not all firmware types have the entire list of typefaces.
•
Data Processing (factory default). A general purpose font printing out at
120 dpi horizontally and 72 dpi vertically. The width of the font will vary
with each cpi. For Indian Language firmware, the Indian character sets
must be selected for Indian characters to print.
•
NLQ . A high quality font printing at 180 dpi horizontally and 96 dpi
vertically. This font has serifs and the width of the font varies with the cpi.
For Indian Language firmware, the Indian character sets must be selected
for Indian characters to print.
•
OCR-A / OCR-B . Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
•
High Speed . A draft quality font printing at 120 dpi horizontally and 48 dpi
vertically. The width of the font varies with the cpi.
•
NLQ Sans Serif . A high quality font printing at 180 dpi horizontally and 96
dpi vertically. This font prints without serifs. The width of the font varies
with the cpi.
•
High Speed 100 . A draft quality font printing at 100 dpi horizontally and
48 dpi vertically. When chosen from the front panel, it defaults to 10 cpi.
The cpi can then be varied, but the width will not change.
•
NLQ 200 . This NLQ font prints at 200 dpi horizontally and 96 vertically.
When chosen from the front panel, it defaults to 12 cpi. The cpi can then
be varied, but the width will not change.
•
DP 200 . This Data Processing font prints at 200 dpi horizontally and 72
vertically. When chosen from the front panel, it defaults to 12 cpi. The cpi
can then be varied, but the width will not change.
•
High Speed 64 . This font prints at 120 dpi horizontally and 64 vertically.
When chosen from the front panel, it defaults to
10 cpi. The cpi can then be varied, but the width will not change.
•
BARCODE 145 . This Data Processing font prints at 145 dpi horizontally
and 72 vertically. When chosen from the front panel, it defaults to 12 cpi.
The cpi can then be varied, but the width will not change.
•
BARCODE 160 . This Data Processing font prints at 160 dpi horizontally
and 72 vertically. When chosen from the front panel, it defaults to 13 cpi.
The cpi can then be varied, but the width will not change.
Typeface (Arabic Language)
NOTE: These Arabic typefaces appear at the end of the list above for the
Arabic Language firmware only. They are only used when the Arabic
Analyzer is enabled.
•
NLQ Naskhi bold
•
NLQ Kofi
•
NLQ Kofi bold
•
NLQ Hadeeth
•
NLQ Req’a
•
NLQ Haydar
•
NLQ Asri