Printronix P8000 Series, Administrator'S Manual

Page: 178 / 422

178
Chapter 4
EMULATION Menu
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when the printer
is powered on.
•
Enable (factory default). The PGL is enabled when the printer is powered
on. (The PGL feature is initialized in the Normal mode.)
•
Disable . The PGL is disabled when the printer is powered on. (The PGL
feature is initialized to the Quiet mode.)
Ext Execute Copy
•
Disable (factory default). Dynamic data and overlay data are not allowed
if the optional Form Count parameter (number of forms to print) is
specified as part of the Execute command. (This setting is IGP-100
compatible.)
•
Enable . Only dynamic data is allowed within a form in which the Form
Count parameter is specified in the Execute command. In this case, the
exact same form (with identical dynamic data, etc.) is printed for the Form
Count. However, incremental data is not incremented since the page that
is printing is exactly the same. Also, each form is printed on a separate
page.
Barcode Options
The following sub-options help define specific options regarding barcode
printing.
UPC Descenders
This parameter allows you to print barcode descenders when human
readable data is not present in the UPC/EAN barcodes.
•
Always (factory default). UPC/EAN barcodes are printed with
descenders, even if there is no human readable data.
•
Never . UPC/EAN barcodes are printed without descenders if there is no
human readable data.
•
Only with PDF . UPC/EAN barcodes are printed with descenders only
when the PDF command is present.
Barcode
Options
(from page 175)
UPC
Descenders
Optimized
Ratio
I-2/5
Selection
AI 00
Spaces
Select SO
Char
Always*
Never
Only with PDF
Disable*
Enable
Leading Zero*
Trailing Space
X2 DPD
Modulo 7 CD
Disable*
Enable
14*
(0-255)
* = Factory Default
User-Def
Ratio
Enable*
Disable
C39
Compatbl.
Disable*
Enable