Printronix P8000 Series, Administrator'S Manual

Page: 212 / 422

212
Chapter 4
EMULATION Menu
Analyzer Activate
When the analyzer is deactivated all incoming data from the host is passed
directly through the Analyzer to the LinePrinter Plus printer emulation without
any processing. The Analyzer only responds to the command: activate
analyzer.
•
Yes (factory default). The emulations under the Analyzer menu are active .
•
No
.
The data is passed down to the LinePrinter Plus printer emulation
without any modification.
Input Emulation
Set the input emulation according to the application you are using.
•
Epson FX (factory default). The Epson-FX emulation
.
•
Epson LQ, Proprinter XL, HP, ANSI, CITOH . Other available
emulations.
Automatic Carriage Return
When Auto CR is enabled, the analyzer sends the printer a Carriage Return
each time it receives a Line Feed. The default is Disabled.
NOTE: You have to use this item to enable the Auto Carriage Return instead
of the menu under the LinePrinter Plus menu as long as the analyzer
is active.