Printronix P8000 Series, Administrator'S Manual

Page: 298 / 422

298
Chapter 8
Fault Messages (ASCII in Alphabetical Order)
B30 STATUS:
INITIALIZING... N/A Status message: the
printer is running its
initialization routines after
startup and successful
memory tests. No action is required.
B50 STATUS:
PANEL CODE BAD
No Saved version of Panel
Code is corrupt. Reload released Firmware.
B51 STATUS: XX%
LOADING... No Status message: printer
boot-up routines are
loading printer system
software into flash
memory and SDRAM. No action required.
Bxx ERROR: NO
DOWNLOADER FOUND No No Downloader was
found while downloading
a file. Reload released Firmware.
BAD NVM CALL 1
BAD NVM CALL 2
BAD NVM CALL 3
BAD NVM CALL 4
BAD NVM CALL A Yes Printer firmware code
error with the Novram
module that stores
configurations and
statistics. 1. Cycle power. Run the
print job again. If the
message appears, load
the latest emulation
software.
2.
Cycle power. Run the
print job again. If the
message appears again,
record the exact display
message, follow the
instructions on page 296,
“Diagnostics for EXX,
BAD NVM, or ILL NVM
Errors”, and contact your
authorized service
representative.
1
x/y BARCODES /
Not Found
Yes Printer detects fewer
barcodes than the set
value for "Barcodes on
Page" menu option. x
represents the number of
barcodes not found, and
y represents the
"Barcodes on Page"
value. Press the ONLINE key.
Table 1. LCD Message Troubleshooting Table (ASCII)
Displayed Message
Can User
Correct?
Explanation Solution