Printronix P8000 Series, Administrator'S Manual

Page: 140 / 422

140
Chapter 4
EMULATION Menu
Italic Print
•
Disable (factory default). Text is printed normally.
•
Forward Slant . Text is printed with a forward slant.
•
Backward Slant . Text is printed with a backward slant.
Slashed Zero
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable (factory default). Zero is printed without a slash.
•
Enable . Zero is printed with a slash.
DBCS/ASCII Mode (H-Series)
•
DBCS Mode (factory default). The printer is in DBCS mode. It can print
double-byte characters as well as a limited number of single-byte
characters.
•
ASCII Mode . The printer is in ASCII mode. It can only print single-byte
characters.
DBCS ASCII Style (H-Series)
This parameter allows you to specify the appearance of the single-byte
alphanumeric characters in DBCS mode.
•
Normal (factory default).
•
Oversize . The alphanumeric characters will appear larger than normal
single-byte characters. For example, the appearance of character “8” will
be changed to “8”.
•
OCRB . The alphanumeric characters will print in OCRB style. It only
takes effect on LQ typeface for Hanzi/Kanji printer.
•
Normal Thin . The alphanumeric characters will be slightly thinner
compared with Normal style. This is only applicable for Hangul printer.